Flooring Services Magor


There are many things you should know if your project involves drywalling over concrete flooring. Most people ask whether drywall should be hung all the way up to the floor. The floor should be drywalled at a minimum. A small space should be left between the plasterboard's bottom and the floor. This is because concrete can get damp from below and the plasterboard's gypsum can absorb moisture. It can cause it to warp or become moldy. This allows the plasterboard to expand and contract in the space between the plasterboard's plasterboard and the frame on which it is mounted.

Does Plasterboard Touch the Floor?

Plasterboard must not touch the floor. The plasterboard should not touch the floor. The gap allows floor and wall to expand while at the same time preventing drywall warping or cracking. In the event of flooding or other unpredicted events, this gap will prevent plasterboard's ability to absorb excess moisture. Hardibaker, or cement board is the only material that can directly rest on the floor. This can be used in places that are susceptible to moisture such as kitchens and bathrooms, instead of drywall. It can withstand water and won't warp, rot or crack as quickly as plasterboard. When exposed to water, it will not grow mold or become brittle.

Why Does Plasterboard Not Go to the Floor?

Plasterboard shouldn't be laid on top of the flooring. You should leave space between them. Plasterboard, which is known for its ability to absorb water and moisture easily transfers between them. You will see yellowing plasterboard and bubbling. Plasterboard shouldn't be extended to the flooring to permit for various floor finishes. For electronics cables, I recommend leaving a gap between the baseboards and the floor. It is sometimes useful to have speaker wires or Ethernet cables connected to your wireless devices in order to provide more power. It is possible to save yourself from making the fatal mistake of dry walling the entire floor. The problem can be fixed, but this will require some work on your part. A rotozip is one of my most favorite tools for cutting plasterboard. The tools come with Gyproc plasterboard bits, which allow you to easily cut the board. It is far easier to use one of these tools than cutting a half inch from the bottom using a utility blade. You can mark the area you wish to cut with a pencil or straightedge if the board is not being removed from the wall. It is possible to take the board from the wall to raise it to the height you desire. While this option is my favourite, I can understand why you might not want to do it if your sheets are already high up. However, if you are able to do so, I recommend taking the board from your wall and doing it correctly. Even though this takes longer, you'll have a better-looking floor. You can then finish the drywall installation as normal. Magor Plastering & Damp Proofing Services has local experts that can help you install high-quality flooring.

51.5798 -2.8312

Undy Llanfihangel Rogiet Redwick Rogiet Bishton Llanvaches Parc Seymour Caerwent Llanvair Discoed Llanwern Whitson Caldicot Crick Goldcliff Kemeys Inferior Portskewett Christchurch Shirenewton Nash Tredunnock Caerleon Llantrisant Mathern Llangybi Ponthir Gaer-fawr Portishead Redwick Llanllowell Llandegveth Severn Beach Weston Down New Passage Avonmouth Chepstow Llangwm Wolvesnewton Weston in Gordano Saint Arvans Pilning Duffryn Walton Down Llantarnam Tutshill Llanbadoc Walton in Gordano Saint Brides Wentlooge Clapton in Gordano Hallen Shirehampton Portbury Usk Easton-in-Gordano Aust Pill Bassaleg Rogerstone Cwmbran Marshfield Llansoy Easter Compton Tidenham Clevedon Glascoed Llancayo Sea Mills Llandenny Llanishen Wraxall Peterstone Wentlooge Olveston Elberton Littleton-upon-Severn Nailsea New Inn Charlton Castleton Monkswood Griffithstown Almondsbury