Flooring Services Rodney Stoke

There are many things you should know if your project involves drywalling over concrete flooring. Most people ask whether drywall should be hung all the way up to the floor. The floor should be drywalled at a minimum. A small space should be left between the plasterboard's bottom and the floor. This is because concrete can get damp from below and the plasterboard's gypsum can absorb moisture. It can cause it to warp or become moldy. This allows the plasterboard to expand and contract in the space between the plasterboard's plasterboard and the frame on which it is mounted.

Does Plasterboard Touch the Floor?

Plasterboard must not touch the floor. The plasterboard should not touch the floor. The gap allows floor and wall to expand while at the same time preventing drywall warping or cracking. In the event of flooding or other unpredicted events, this gap will prevent plasterboard's ability to absorb excess moisture. Hardibaker, or cement board is the only material that can directly rest on the floor. This can be used in places that are susceptible to moisture such as kitchens and bathrooms, instead of drywall. It can withstand water and won't warp, rot or crack as quickly as plasterboard. When exposed to water, it will not grow mold or become brittle.

Why Does Plasterboard Not Go to the Floor?

Plasterboard shouldn't be laid on top of the flooring. You should leave space between them. Plasterboard, which is known for its ability to absorb water and moisture easily transfers between them. You will see yellowing plasterboard and bubbling. Plasterboard shouldn't be extended to the flooring to permit for various floor finishes. For electronics cables, I recommend leaving a gap between the baseboards and the floor. It is sometimes useful to have speaker wires or Ethernet cables connected to your wireless devices in order to provide more power. It is possible to save yourself from making the fatal mistake of dry walling the entire floor. The problem can be fixed, but this will require some work on your part. A rotozip is one of my most favorite tools for cutting plasterboard. The tools come with Gyproc plasterboard bits, which allow you to easily cut the board. It is far easier to use one of these tools than cutting a half inch from the bottom using a utility blade. You can mark the area you wish to cut with a pencil or straightedge if the board is not being removed from the wall. It is possible to take the board from the wall to raise it to the height you desire. While this option is my favourite, I can understand why you might not want to do it if your sheets are already high up. However, if you are able to do so, I recommend taking the board from your wall and doing it correctly. Even though this takes longer, you'll have a better-looking floor. You can then finish the drywall installation as normal. Rodney Stoke Plastering & Damp Proofing Services has local experts that can help you install high-quality flooring.

Draycott Westbury-sub-Mendip Priddy Cheddar Theale Henton Cocklake Wookey Wedmore Axbridge Godney Weare Polsham Blackford Chapel Allerton Shipham Stone Allerton Blagdon Compton Martin Meare Ubley Westhay Burrington Sidcot Badgworth East Harptree West Harptree Churchill Lower Langford Sandford Mark South Widcombe Chewton Mendip Litton Butcombe Rooks Bridge North Widcombe Loxton Banwell Burtle Wrington Redhill Chew Stoke Shapwick Bishop Sutton East Brent Watchfield Congresbury Stowey Bason Bridge Brent Knoll Edington Ashcott Cote East Huntspill Locking Temple Cloud Puxton Hutton Greinton Edithmead Lympsham Chew Magna Woolavington Winford Lulsgate Bottom Bleadon Cossington Clutton Yatton Brockley Highbridge Stawell Sutton Mallet Dundry Huntspill Burnham-on-Sea Worle Chelvey Puriton